Efficient large-scale multiplexing of fiber Bragg grating and fiber Fabry-Perot sensors for structural health monitoring applications

Fiber Bragg gratings have been demonstrated as a versatile sensor for structural health monitoring. We present an efficient and cost effective multiplexing method for fiber Bragg grating and fiber Fabry-Perot sensors based on a broadband mode-locked fiber laser source and interferometric interrogation. The broadband, pulsed laser source permits time and wavelength division multiplexing to be employed to achieve very high sensor counts. Interferometric interrogation also permits high strain resolutions over large frequency ranges to be achieved. The proposed system has the capability to interrogate several hundred fiber Bragg gratings or fiber Fabry-Perot sensors on a single fiber, whilst achieving sub-microstrain resolution over bandwidths greater than 100 kHz. Strain resolutions of 30n epsilon/Hz(1/2) and 2 n epsilon/Hz(1/2) are demonstrated with the fiber Bragg grating and fiber Fabry-Perot sensor respectively. The fiber Fabry-Perot sensor provides an increase in the strain resolution over the fiber Bragg grating sensor of greater than a factor of 10. The fiber Bragg gratings are low reflectivity and could be fabricated during the fiber draw process providing a cost effective method for array fabrication. This system would find applications in several health monitoring applications where large sensor counts are necessary, in particular acoustic emission

Rapid characterization of the ultraviolet induced fiber Bragg grating complex coupling coefficient as a function of irradiance and exposure time

We report the application of optical frequency domain reflectometry and a discrete-layer-peeling inverse scattering algorithm to the spatial characterization of the UV induced complex coupling coefficient during fiber Bragg grating growth. The fiber grating is rapidly characterized using this technique to give irradiance dependent growth as a function of exposure time, thereby providing the complete characterization of the coupling coefficient in the form of a "growth surface," which is related to the fiber's photosensitivity. We compare measurements of fiber Bragg grating growth in SMF-28 when exposed to continuous wave 244 nm irradiation from 0 to 90 W cm(-2) for exposure times up to 3230 s with a selection of other fibers including high germanium concentration fiber and erbium doped fiber. (c) 2007 Optical Society of America

Multicore fiber curvature sensor

An apparatus includes a multicore fiber including three cores. The three cores include two pairs of cores, each pair of cores lying in a plane. The planes of the two pairs of cores are non-coplanar. The multicore fiber includes a rosette, the rosette including three coplanar interferometers. Each interferometer of the three interferometers are located in a respective core of the three cores. Each interferometer includes a first reflector and a second reflector. The first reflectors of the rosette are coplanar. The second reflectors of the rosette are coplanar

Characterization of atomic spin polarization lifetime of cesium vapor cells with neon buffer gas

The dephasing time of spin-polarized atoms in an atomic vapor cell plays an important role in determining the stability of vapor-cell clocks as well as the sensitivity of optically-pumped magnetometers. The presence of a buffer gas can extend the lifetime of these atoms. Many vapor cell systems operate at a fixed (often elevated) temperature. For ambient temperature operation with no temperature control, it is necessary to characterize the temperature dependence as well. We present a spin-polarization lifetime study of Cesium vapor cells with different buffer gas pressures, and find good agreement with expectations based on the combined effects of wall collisions, spin exchange, and spin destruction. For our (7.5 mm diameter) vapor cells, the lifetime can be increased by two orders of magnitude by introducing Ne buffer gas up to 100 Torr. Additionally, the dependence of the lifetime on temperature is measured (25 - 47 oC) and simulated for the first time to our knowledge with reasonable agreement

Optically powered DFB fiber laser magnetometer

An optically powered DFB fiber laser based magnetometer free from hysteresis, incorporating drift compensation is demonstrated. Optical power is delivered through a dedicated fiber to provide the required dither current yielding an electrically passive sensor

Time division multiplexing of fiber Bragg grating sensors using a mode-locked fiber laser source

An efficient multiplexing method for fiber Bragg grating sensors based on a broadband mode-locked laser source and interferometric interrogation is described. The system has the capability to interrogate several hundred fiber Bragg grating sensors on a single fiber, whilst achieving sub-microstrain resolution over bandwidths greater than 100 kHz. A demonstration system with 8 sensors is presented, which achieves strain resolutions less than 213 n epsilon/Hz(1/2) up to 100 Hz